Young & Franklin Hydraulic Controls ELECTRONICS & ACCESSORIES Young & Franklin's own line of electronic devices and accessories to support their electromechanical and electrohydrostatic actuators, as well as state-of-the-art testing equipment for their hydraulic line. Also found here are general accessories for all turbines.

Y&F 7-3000 Series Electromechanical Actuators Forces from 500 - 750 lbs for electric actuation. FEATURES Brushless DC servo motor Minimum force: 500 lbs @ 212 °F (100°C) Peak force: 750 lbs. Stroke: 2.500 inch with integrated anti-rotation Maximum speed: 11.0 inch/second Moisture: IP 65, Type 4X enclosure Operating temperature: -40° to 212°F (-40° to 100°C) The actuators are certified to North American and European standards for use in hazardous locations. Required Y&F 1000 Series Digital Actuator Controller Assy (ref. PB-016) APPLICATIONS Used with Y&F 3010 Series EMA Gas Control Valves Steam turbine trip and throttle applications inlet guide vane actuation Download Y&F 7-3000 Series Electromechanical Actuators Product Bulletin PDF     7-3001 ELECTROMECHANICAL ACTUATORS High Force/High Speed Actuation FEATURES Electromechanical Actuator with Integrated Ballscrew High Force/High Speed Actuation Servo Controlled Over Full Stroke Back Driven Capability for Failsafe Applications Light Compact Integrated Design Brushless Motor Position Sensor Ballscrew W/ Integral Anti-Rotation High Precision: -.025% Linear Position Repeatability: 0.001" Resolution: 0.00012" Linear Travel Environment IP Rating: IP65 Temperature: -40°C To+100°C Shock And Vibration Tolerant Designed To Zone 4 APPLICATIONS Valve Actuator Steam Turbine Accessories Trip/Throttle Applications Gas Turbine Accessories Gas & Liquid Fuel Valve Actuator Line Size Up To 3 Inches Inlet Guide Vane Actuator Process Industries Gas And Liquid Control Valve Actuation Line Size Up To 3 Inches Actuation in Hazardous/High Temperature Locations Control Valves Dampers Louvers Workpiece Positioning Download 7-3001 Electromechanical Actuators Product Bulletin PDF     8605 PID Controllers/LVDT Conditioners Adjustable PID gains and time constants for a variety of closed loop control applications. Single-point DIN rail mounting feature. FEATURES Voltage and current differential command and feedback inputs Ramp input Voltage and current outputs Adjustable gains (PID) Switchable time constants (ID) Adjustable current offset Integrator (I) disable Selectable integrator limits PID gains test/measurements points Integrator antiwindup circuitry Inputs and outputs transient voltage protected Dither Reset on power-ON & power-OFF preventing uncontrollable behavior Wide range of power supply voltages Provision for optional single or dual LVDT transducer interface card Standard board form factor with optional enclosure and DIN rail mounting   APPLICATIONS Valve actuator control Hydraulic servo control Servo actuators Redundant feedback loop control Pressure, flow, temperature, or position control Download 8605 PID Controllers/LVDT Conditioners Product Bulletin PDF     Y&F 1000 Series Digital Actuator Controller Assembly Digital microcontroller-based controller for Y&F EMA actuators FEATURES Indoor/ outdoor IP65, NEMA 4 enclosure type Line power input: 80-180 VDC, 70-130 VAC 1 phase (25 A max.) Operational temperature range: 20°C to +60°C(-4°F to +140°F) Storage temperature range: -40°C to +85°C(-40°F to +185°F) ENABLE: Optically coupled 24 VDC input Motor thermostat: Optically coupled, transient protected Position monitor output: 4-20 mA Resolution: 12 bits RS 485, half duplex serial port Certified to North American and European standards for use in hazardous (Div.2/Zone 2) and non-hazardous locations. Contact Y&F for details. APPLICATIONS For use with Y&F Gas/ Liquid Valve electromechanical actuators Download Y&F 1000 Series Digital Actuator Controller Assembly Product Bulletin PDF     9800 Dual-Channel Rotary Variable Displacement Transducer (RVDT) For quarter-turn position sensing or in conjunction with EMA, hydraulic, or pneumatic rotary actuators as a valve positioner in intrinsically safe, non-incendive, and explosion-proof versions. FEATURES Intrinsically Safe, Non-Incendive, and Explosion Proof Versions AC Excitation High Reliability Dual Coil Device Direct Rotary Position Indicator Assured to ±0.9° Within Range of 0.7 Vrms to 3.5 Vrms Rugged Housing Hazardous Area Tested and Approved CENELEC: EEx ia IIC T4, Tamb + 120°C (With Approved Barrier Boards) Ex nV [L] IIC, T4, Tamb + 120°C ETL Listed: Class I, Div I & II, Groups B, C, D •Certified to CAN/CSA E79-15-95 Conforms to ANSI/UL STD. 2279 APPLICATIONS Quarter Turn Position Sensing In Conjunction with Electromechanical, Hydraulic, or Pneumatic Rotary Actuators as a Valve Positioner. Download 9800 Dual-Channel Rotary Variable Displacement Transducer (RVDT) Product Bulletin PDF